Network Black Box Media Converter Ethernet To Fiber Optic High Performance

Network Black Box Media Converter Ethernet To Fiber Optic High Performance

Overview

Ethernet to fiber media converter supports two types media for network connection such as 10/100/1000Base-T and 1000Base-SX/LX. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. With internal power unit, it provides good stability and reliability.

Checklist

Before you installing the Converter, verify that the package contains the following:

1. The TP-Fiber Media converter.
2. AC Power Cord.
3. his User’s Manual.

Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged.

Installing the Converter

1. Attach a SFP to SFP Cage on the converter
2. Attach fiber cable from the Converter to the fiber network.. The fiber connections must be matched: transmit socket to receive socket.
3. Attach a UTP cable from the TP network device to the RJ45 port on the Converter.
4. Connect the power cord to the Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will light when all the cable connections satisfactory.

Technical Specifications

The Converter conforms to the following standards:

1. Standerds: IEEE 802.3z/AB 10/1001000Base-T 1000Base-SX/LX
2. UTP Cable: Cat.5e orCat.6 cable and up to 100m.
3. Fiber Cable: 1000SX: 50/125,62.5/125µm molti-mode 1000LX: 9/125µm single-mode.
4. Data Transfer Rate:2000Mbps for full-duplex at 1000Mbps speed.
5. LED Indicators:TP Act, Fdx, 100, 1000 , Power, FX Act
6. TP Flow Control: NWay auto-negotiation Fiber Flow Control: NWay at full-duplex mode
7. Power Requirement: 220V(175-260V)AC,50Hz
8. Ambient Temperature: 0 ~ 50°C
9. Humidity: 5% ~ 90%
10. dimensions: Internal: 26×70×93mm

LED Description

There are six LED At Front View of Gigabit SFP Converter

Fiber Technical Specifications

Order information

10/100/1000m sfp media converter