Product Description

Compatible Brand 10G BIDI 3KM TX1310/RX1310nm SMF Bidirection SFP+ Fiber Optical Transponder

100KM 10Gb BIDI SFP

Tx: 1310nm/ Rx: 1310nm BIDI SFP+ Transceiver for 10GbE

Tx: 1310nm/ Rx: 1310nm BIDI SFP+ Transceiver for 10GbE

Features

Supports 9.95 to 10.3Gb/s bit rates

Simplex LC Connector

Hot pluggable SFP+ footprint

Uncooled 1310nm LD transmitter, 1310nm PIN photo-detector

Applicable for 3km SMF connection

Low power consumption, < 1.0W

Digital Diagnostic Monitor Interface

Optical interface compliant to IEEE 802.3ae 10GBASE-LR

Electrical interface compliant to SFF-8431

Operating case temperature:

Commerical:0 to 70 °C

Applications

10GBASE-LR at 10.3125Gbps

10GBASE-LW at 9.953Gbps

Other optical link

General

         Hilink HLSB311XL-CD03 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HLSB311XL-CD03 module is designed for single mode fiber and operates at a nominal wavelength 1310nm; The transmitter section meet the class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication.

10G BIDI Transceiver

Product Picture

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER; BER<10^-12; 2^{31 – 1} PRBS.

Ordering Information